Official TDS & Certified Test Reports Library
Select any model below to open and view the verified Technical Data Sheet (PDF) directly in a new tab, download for your architectural submittal, or contact our engineering team via WhatsApp for customized test reports.
PU-40 – Industrial Polyurethane Construction Sealant
High-performance one-component moisture-curing polyurethane sealant engineered for heavy precast concrete facades, expansion joints, and metal roof lap seams.
- Tensile Strength: ≥ 1.4 MPa | Elongation at Break: ≥ 500%
- Movement Capability: ±25% | Shore A Hardness: 35–45
- Compliance: ISO 11600 Class 25HM / ASTM C920 Type S Grade NS Class 25
PU-30 – Low Modulus Polyurethane Joint Sealant
Low-modulus, high-elasticity joint sealant designed for concrete expansion joints and curtain wall perimeters accommodating thermal slab movement.
- Modulus at 100%: ≤ 0.4 MPa | Elongation at Break: ≥ 800%
- Movement Capability: ±25% | Shore A Hardness: 25–30
- Compliance: ISO 11600 Class 25LM / ASTM C920 Class 25
PU-24 – Direct Glazing Polyurethane Windshield Adhesive
Primerless high-viscosity polyurethane adhesive for direct glazing of automotive glass, bus windshields, and heavy machinery cabins with crash-tested safety.
- Tensile Lap Shear: ≥ 4.0 MPa | Shore A Hardness: 55–65
- Safe Drive-Away Time: 2 Hours (FMVSS 212/208 Compliant)
- Compliance: OEM Automotive Direct Glazing Standards
SL-100 – Self-Leveling Polyurethane Floor Joint Sealant
Single-component self-leveling polyurethane joint sealant for horizontal expansion joints in warehouse concrete slabs, airport runways, and parking decks.
- Self-Leveling Flow: 100% Horizontal Smoothing without Tooling
- Movement Capability: ±25% | Shore A Hardness: 35–40
- Compliance: ASTM C920 Type S Grade P Class 25 / Federal Spec TT-S-00230C
SL-90 – Heavy-Duty Commercial Concrete Joint Sealant
Heavy-duty self-leveling joint filler engineered to protect joint shoulders against hard-wheeled forklift traffic, puncture, and abrasion in high-traffic logistics centers.
- Shore A Hardness: 45–50 | Tear Resistance: ≥ 10 N/mm
- Chemical Resistance: Hydrocarbons, Motor Oils, Deicing Salts
- Compliance: ACI 302.1R Class 6–9 Industrial Floor Standards
SL-003 – Ultra-Low Viscosity Concrete Crack Repair Resin
Ultra-low viscosity moisture-curing polyurethane resin engineered to gravity-feed deep into hairline cracks (0.2mm to 5mm) in concrete floors and bridge decks.
- Viscosity: ≤ 150 mPa·s (Water-like Fluidity)
- Tensile Bond Strength: ≥ 2.5 MPa (Concrete Cohesive Failure)
- Compliance: ASTM C881 / EN 1504-5 Concrete Injection Standards
XYT928 – Structural Glazing Silicone Sealant
Premium high-modulus neutral silicone sealant designed specifically for factory or on-site structural glazing of glass curtain walls and unitized facade modules.
- Tensile Adhesion: ≥ 1.0 MPa (ASTM C1184 Standard: ≥ 0.345 MPa)
- Movement Capability: ±25% | Shore A Hardness: 40–45
- Compliance: ASTM C1184 / GB 16776 Structural Glazing Certified
XYT926 – Weatherproofing Silicone Architectural Sealant
Ultra-flexible neutral cure silicone sealant engineered for exterior facade weatherseals, curtain wall perimeter joints, and aluminum composite panel cladding.
- Joint Movement Class: ±50% | Non-Staining: ASTM C1248 Passed
- Weathering Resistance: 5,000+ Hours UV Exposure Without Chalking
- Compliance: ASTM C920 Class 50 / ISO 11600 Class 25LM
XYT932 – Anti-Fungal Sanitary Silicone Sealant
High-grade 100% silicone sanitary sealant formulated with active fungicides for sealing kitchens, commercial cold rooms, laboratories, and shower enclosures.
- Anti-Mold Rating: Class 0 (ASTM G21 Zero Fungal Growth at 28 Days)
- Waterproof Durability: 100% Watertight Non-Shrinking Barrier
- Compliance: ISO 846 Microbiological Assessment / FDA CFR 177.2600
MS-30RV – RV Roof Lap & Caravan Sealant
Advanced hybrid MS polymer formulated for motorhome roof laps, AC skylight penetrations, and vehicle body seams under extreme vibration.
- Tensile Strength: ≥ 2.2 MPa | Solvents: 0% Isocyanates
- Shore A Hardness: 30–35 | UV Xenon Test: 3,000+ Hours
- Compliance: DIN 53504 / ASTM C920 Class 25
PUR-15 – D4 Waterproof Polyurethane Wood Adhesive
High-strength single-component polyurethane wood glue with 100% waterproof boiling water resistance for exterior timber, furniture, and structural lamination.
- Boiling Water Shear: ≥ 4.0 N/mm² (EN 204 D4)
- WATT 91 Heat Strength: ≥ 7.0 N/mm² at 80°C
- Compliance: EN 204 Class D4 / DIN EN 14257 (WATT 91)
WS-1838 – Silane Modified Wood Flooring Adhesive
Elastic MS polymer wood floor adhesive for solid hardwood, engineered parquet, and wide plank installation over underfloor heating systems.
- Shear Strength: ≥ 1.5 MPa | Elasticity: Permanently Flexible
- VOC Emissions: GEV-EMICODE EC1 Plus Certified
- Compliance: ISO 17178 Elastic Flooring Adhesive
Liquid Nails – Heavy-Duty Construction Panel Adhesive
High-strength neoprene/synthetic rubber construction adhesive for bonding drywall, subflooring, acoustic batts, mirrors, and decorative architectural panels.
- Initial Green Grab: > 120 kg/m² | Ultimate Strength: ≥ 3.5 MPa
- Gap Bridging: Up to 10 mm | Substrates: Concrete, Timber, Steel
- Compliance: ASTM C557 / AFG-01 Subfloor Standard
Request Technical Document Package
Complete this form to receive official TDS PDFs, ISO/ASTM test certificates, and complete project compliance documents within 2 hours.
